1 x Telescopic cantilever gate
Case Study
CSR Springvale Sand Loading Safety System
Custom industrial gate automation system for CSR, Springvale.
Location
Springvale, VIC
Client
CSR
Industry
Industrial / Manufacturing
System Type
PLC Controlled Safety Compound
Gates Installed
Telescopic Cantilever + Swing Gate
Automation Features
Radar Sensors, Loop Detection, LED Warning System
Fabrication
Fully In-House
Project Overview
Gatepower was engaged by CSR at their Springvale facility to design and deliver a fully automated safety-controlled access system around a sand loading area used by an industrial tractor and hopper loading operation.
The objective was not simply to install gates. CSR needed a smarter system that could automatically secure the area whenever the sand loading tractor was operating, while still allowing safe and controlled vehicle and pedestrian movement when required.
The completed project combined custom fabricated gates, perimeter fencing, advanced automation, PLC programming, radar detection systems and integrated warning infrastructure into a single coordinated industrial safety system.
Industrial Safety Challenges
CSR had ongoing safety concerns with unannounced traffic entering the sand loading area while the loading tractor was operating.
- Trucks entering active loading zones
- Vehicles crossing tractor movement paths
- Pedestrian exposure
- Operational interruptions during loading procedures
- Large truck and forklift traffic
- Limited gate installation options
- Need for automated operation without slowing production
- Strict maintenance-day installation windows
- Requirement for fail-safe override control for operators
“Because the site remained operational, reliability and safety logic were critical parts of the project from day one.”
Why CSR Chose Gatepower for Industrial Automation
Gatepower had previously completed other industrial traffic and safety automation projects for CSR. That existing relationship gave CSR confidence that Gatepower understood industrial operating environments, heavy vehicle traffic flow, automation safety requirements, and the realities of working inside active manufacturing facilities.
- Boom gates
- Traffic light systems
- Internal factory safety control systems
Custom PLC-Controlled Industrial Gate System
Gatepower designed and delivered a custom automated compound access system that secured the sand loading area whenever the tractor moved into operation.
The system was built around a custom programmed PLC (Programmable Logic Controller), allowing all automation, safety devices and warning systems to operate together as one integrated solution.
Installed Infrastructure
Automated Factory Access Control Logic
The system was designed to operate automatically with minimal manual intervention. A loop detector sensor was installed within the tractor parking zone. Once the tractor moved out of its designated loading position, the PLC system automatically initiated gate closure procedures to isolate the loading area.
Multiple radar sensors were installed to monitor large vehicle movement zones. These provided broader detection coverage than traditional photocells and reduced the risk of collisions involving trucks, forklifts or trailers.
The pedestrian gate was also integrated into the safety sequence and automatically locked whenever the loading zone became active.
- Temporary gate override if a vehicle remained inside the loading area
- Reopening of the exit gate when required
- Resumption of automatic PLC operation
- Activation of high-powered flashing LED warning bars when operating outside the designated loading zone
Commercial Telescopic Cantilever Gate Installation
One of the most technically unique parts of the project was the telescopic cantilever gate system. Traditional floor track gates were ruled out due to the heavy truck and forklift traffic. Swing gates and standard cantilever gates were also unsuitable because of available space.
Telescopic cantilever gates are significantly more complex than standard gate systems and are far less common due to their engineering and fabrication requirements. However, for this site, it provided the most practical long-term outcome.
- Large opening widths
- Reduced runback requirements
- No ground track obstruction
- Reliable operation in an industrial environment
In-House Industrial Gate Design & Fabrication
This project was fully completed in-house by Gatepower. Having all stages completed internally allowed tighter quality control and smoother coordination across fabrication and automation components.
- System design
- Fabrication & CNC laser cutting
- Custom bracket and flashing manufacture
- Powder coating
- Installation & electrical wiring
- Automation integration & PLC programming
Results
Project Outcomes & Ongoing Performance
The completed system has now been operating successfully for approximately two years. The project demonstrates how industrial gate systems can move beyond basic perimeter security and become part of a broader operational safety solution.
Need a custom industrial
automation solution?
We engineer, fabricate, and install heavy-duty systems for sites where
standard products fail.
Contact Gatepowerstandard products fail.